Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$39.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes
$11.99
The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)
$3.99
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
$17.95
Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches
$28.00
Chainstay Protection Stay Skinz, Clear is specifically designed to discreetly provide bomb-proof protection for your seat and chain stays against impact and wear, commonly picked up on the trails and in transit.
$30.00
Giant's Mobility Kickstand attaches to your bike's frame at the rear dropout for convenience and easy access.
$19.99
Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit
$20.99
Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit
$9.99 - $16.25
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$99.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes
$4.00 - $7.00
You can proudly display these Surly Logo Stickers just about anywhere they'll fit. They comes in three sizes to meet a wide range of sticking needs.
$20.00
Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.
$20.00
Further personalize your unique Surly bike with one of four Surly Make It Your Own Decal Sets, featuring alternative fonts and designs for the discerning rider. Stickers may also be affixed to helmets, mini fridges, dog food bowls, and more. - Decals are available in black or white - Each set includes decals for the down tube, chainstays, and fork blades, a Surly Make It -your Own seat tube icon, Surly headbadge, and a ’Natch frame sticker - Dry-transfer style
$13.99
- Highly reflective sticker sheets that contain a variety of different shapes and sizes of stickers - Perfect for frames, helmets, pads, or anywhere you want to add a bit more visibility
$14.99
Eyebolt and Nut Set for mounting V-Stays to the Bluemels Fenders. Contains 8 stainless eyebolts, 8 stainless nuts and 8 plastic stay endcaps. The set is available in either black or silver finish. This hardware set is included with the fenders, this kit is available as a replacement. - Made in Germany - 11890 Nuts and bolts are black finish - 11891 Nuts and bolts are silver finish
$35.00
Most riders should protect the lowers and crowns of their MTB forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet
$14.99
Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit
$24.99 - $32.50
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
$9.99
Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.
$24.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 55mm wide x 269mm long - 14 mils thick polyurethane for durability - UV Resistant
$39.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 3 small frame protectors - 2 large frame protectors
$2.29
Rep your ride with some sweet new Pure Cycles stickers! These sticker packs come with a random assortment of sticker designs and include roughly 4 stickers per pack. Think of it like a grab bag full of stickery awesomeness. Who knows what you'll find! Well you'll probably find stickers but you get the idea: Pure Cycles + Stickers = Awesome BOOM!
$24.99
• Rear mount • Fits 26" wheels
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$14.99
You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork. - Fits Fork Stanchion size 32-36mm - Fits forks up to 180mm in travel - Weight: 31 grams (pair)
$14.59
• Forged aluminum construction • Center mount design
$335.00
The Surly Kid Corral is just that: A Corral where you can store your kids when they’re riding on the deck of your Big Easy, Big Dummy, or Big Fat Dummy. Designed to be semi-modular, the corral offers up different configurations to fit your unique human-corralling needs. As your family grows in size or number, you can adjust the Kid Corral to give your tiny humans more or less freedom. The Kid Corral Kit comes equipped with a full safety rail system, two soft Deck Pads, and a Deck Bar comfortable enough for tiny paws. As an added bonus, the Kid Corral system is tested and compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions. - Semi-modular system is designed to easily add or remove sections of the corral rails to fit your passenger safety needs - Kit includes the full safety rail system, two soft Deck Pads, Deck Bar and required mounting hardware - The Kid Corral system is also compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions
$90.00
The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit
$9.99
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.