- Bolt-on Axle Adapter
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Trailer Parts
This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Burley's Travoy Tie Down Straps help you secure your cargo to your Burley Travoy trailer (sold separately). These straps, sold in pairs, can replace the straps that come standard with the Travoy trailer or they can be used for added stability.
$24.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ Kickstands. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Biking or strolling, the Bark Ranger™ Kickstand helps your dog’s trailer stay level and steady when not in motion. Easy to fold and unfold, the kickstand can be installed on the front or back of the trailer to allow for stable loading and unloading. When you pause for a mid-ride water break or stop to talk to a friend during a stroll, the kickstand provides added stability to keep your pet feeling secure and comfortable. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Size L x W x H (in) 11.2 x 0.9 x 3 - Size L x W x H (cm) 28.5 x 2.3 x 7.5
Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ XL Kickstand. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Designed to support bigger dogs in the Bark Ranger™ XL, the Bark Ranger™ XL Kickstand provides added stability for your dog’s trailer. The kickstand attaches to the front or rear of the trailer and helps your dog feel secure by keeping the trailer level during mid-ride pauses or when loading and unloading. When it’s time to head out, simply fold up the kickstand and you’re ready to roll. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Dimensions L x W x H (in) 15.2 x 0.9 x 3 - Dimensions L x W x H (cm) 38.5 x 2.3 x 7.5
Keep your Burley pet trailer (sold separately) stable and make loading and unloading your 4-legged family member super easy with this kickstand. It folds up and out of the way when it's time to go, too.
This Travoy hitch from Burley connects your Travoy trailer (sold separately) to your bicycle seatpost. Replace a lost hitch or get one for each bike in your quiver for convenience.
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
A skewer for your Surly Trailer.
Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.
Burley’s Quick Hitch allows for tool-free installation to connect the Travoy to the bicycle seat post. Attaches and detaches for easy transitions between bikes.
Surly Trailer Parts
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
Adaptors for Benno Boost E and Carry On allow for the use of Thule trailers.
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Keep your little one warm so your routine doesn't change when the weather does. • Super soft interior is plush next to your child’s skin. • Compatible with most 5-pt harness systems and systems that include a lap belt. • Velcro backing for a perfect fit with all Burley trailers and strollers. • Recommended for children ages newborn to 2-years old. • Machine-washable.
Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction
The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers
Equip your bike for next-level adventures with the Burley Thru Axle. This simple to install adapter opens the door to new biking possibilities by allowing you to connect a kid, cargo, or pet bike trailer to bikes with 12mm thru-axles.
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Page 1 of 3 Next page