Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Hubs
$85.00
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do.
They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability.
Front hub specs:
- Weight: 198g
- Torque Spec: 33nm (25ft lbs.)
- Non-Drive Side Center to Flange: 34mm
- Drive Side Center to Flange: 34mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
Rear hub specs:
- Weight: 234g
- Torque Spec: 33nm (25ft.lbs.)
- Non-Drive Side Center to Flange: 29mm
- Drive Side Center to Flange: 29mm
- Non-Drive Side Flange Diameter: 62mm
- Drive Side Flange Diameter: 62mm
$149.99
The Box One Stealth Expert Front Hub is designed to be light FOR lightweight riders, and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. This makes the Stealth Expert Front Hub ideal for any Mini, Junior, or Expert wheel build, but may also accommodate a lightweight rider looking to move up to a pro-sized bike.
FEATURES
- Micro-Adjust Pre-Load Collar
- Lightweight Design
IMPORTANT NOTES
Warning: The BMX spec is optimized for even lower drag with unsealed bearing. They are designed to be ridden in dry conditions. If ridden in wet conditions you will need to service the internals after each event or riding session.
COMPATIBILITY
- Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork Black
- Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork
- Box One 24x1-1/8" 28-Hole Front Rim Black
- Box One 20X 1-1/8" 28-Hole Rim Rear Black
$349.99
The Box One Stealth Expert Rear Hub is designed to be lightweight for smaller riders and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. Featuring our Stealth Technology adds instant engagement and silent low-drag coasting making it ideal for Mini, Junior, or Expert wheel build. Still, it may also accommodate a lightweight rider looking to move up to a pro-sized bike.
FEATURES
- Stealth Technology™
- Instant Power Delivery
- Low Drag Coasting
- Infinite Points of Engagement
- Silent Coasting
- Micro-Adjust Pre-Load Collar
$27.99
- Heat-treated axle for improved strength
- Angled Flanges for lateral stability in wheel building
- Rear hubs include a 4-pawl cassette body with 9-tooth driver
- Use: Front
- Drilling: 36H
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
$50.99
- Includes 9T Micro drive cog
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Drilling: 36H
- Axle: Nutted 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Loose
$53.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Front
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
- Bearing Type: Sealed
$54.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Front
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
- Bearing Type: Sealed
- Hole Count: 36
$54.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear
- Gears: Flip-flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
$54.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Front
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 100mm
$54.99
- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings
- Sealed bearing for improved performance and longevity
- Use: Rear
- Gears: Flip/flop singlespeed freewheel
- Drilling: 36H
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
$66.99
- Single speed BMX hubs with a 14mm axle slotted to 3/8-inch
- Sealed bearings
- Use: Rear
- Gears: Singlespeed Freewheel
- Drilling: 36H
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
$96.99
- Heat-treated axle for improved strength
- Angled flanges for lateral stability in wheel building
- Rear hubs include a 4-pawl cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Axle: 14mm, 3/8-inch
- Material: Alloy
- Drilling: 36
$96.99
- Heat-treated axle for improved strength
- Angled Flanges for lateral stability in wheel building
- Rear hubs include a 4-Pawl Cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Spacing / Axle: 14mm
- Material: Alloy
- Drilling: 48
$120.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear 110mm
- Driver: Singlespeed cassette w/12T cog and lockring
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
- Drilling: 32
$120.99
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear 110mm
- Driver: Singlespeed cassette w/12T cog and lockring
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
- Drilling: 36
$173.99
- Singlespeed freecoaster hubs with 9-tooth driver
- Sealed bearings
- Use: Rear
- Gears: Singlespeed w/ 9-tooth driver
- Drilling: 36
- Axle: 14mm
- OLD: 110mm
- Bearing Type: Sealed
$87.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 110mm forks
- Flange diameter: 58mm
- NDS flange offset: 25.5mm
- DS flange offset: 37.75mm
- 28 hole, 6-bolt rotor
$87.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 100mm forks
- Flange diameter: 58mm
- NDS flange offset: 20.5mm
- DS flange offset: 32.75mm
- 28 hole, 6-bolt rotor
$116.99
Dust off that truing stand for a fresh wheel build.
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
PRODUCT DETAILS
- Bontrager front hub for use with 110mm OLD fork and 20mm thru-axle
- Flange diameter: 58mm
- NDS flange offset: 26mm
- DS flange offset: 38mm
- 32 hole, 6-bolt rotor
$116.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Product details
- Bontrager front hub for use with 150mm forks
- Flange diameter: 58mm
- NDS flange offset: 45mm
- DS flange offset: 53.5mm
- 32 hole, 6-bolt rotor
$175.99
Dust off that truing stand for a fresh wheel build.
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
PRODUCT DETAILS
- Bontrager rear hub for use with 157mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 40mm
- DS flange offset: 37mm
- 32 hole, 6-bolt rotor
- Equipped with Shimano 7-speed freehub
$230.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset.
Product details
- Bontrager rear hub for use with 197mm dropouts
- Rapid Drive 108 hub instantly transfers effort into forward momentum
- Flange diameter: 58mm
- NDS flange offset: 59.5mm
- DS flange offset: 46mm
- 32 hole, 6-bolt rotor
$329.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset.
Dust off that truing stand for a fresh wheel build.
- Rapid Drive 108 fat bike hub set with Oil Slick finish
- 32 hole, 6-bolt disc
- 150X15 Front / 197x12 Rear
- Rear hub is equipped with SRAM XD driver, additional freehubs available
$588.00
Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Steel Bearings
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Come in 28h and 32h drilling
- Available with Micro Spline, HG or XD driveshell.
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our ISO Hub Service Tool
- Responsibly lightweight
- Ceramic bearing upgrade available
- Specifically designed for "BOOST" 148mm x 12mm axle standard
$3.40
Parts for repair and maintenance of DT Swiss hubs.
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$223.90
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion
Page 1 of 4
Next page