A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

• Aluminum • CNC-finished

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs

- DT Swiss cartridge bearings - Sold in pairs

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Type: Lock washer - Size: 1" Keyed

• Aluminum clamp with a chromoly bolt

- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm

- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes

Sunlite braze-on front derailleur adapter

- Alloy construction - Great for Cruiser or BMX bar conversions

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

- Chrome allen seat binder bolt

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- For MTB levers - 7mm x 1mm - Aluminum construction

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

• Aluminum clamp • Built-in rear rack mount

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel

- Rubber - Color: Black

- Crown Race MX - Size: MX TH 26.4mm

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Use: S.I.S. - Length: 30mm

- Stainless steel button head bolts - Sold in bags of 10

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Replacement front cable hanger - Aluminum construction

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

46 x 55 x 51 x 152mm

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Standard replacement cantilever/v-brake bosses

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Cartridge Bearing - 1-3/8-inch Outer Diameter

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- w/Nut - 1-3/4-inch

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

- Routes cables underneath the bottom bracket - Will not rust or corrode

• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip

- 8x1mm Allen head

Replacement bearing for the lower half of YST8003 #7 headset.

- Standard steel replacement

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Replacement M5 lock nut for cable anchor bolts, fender bolts, etc. - Bag of 10

- Crown Race #8 - Size: 26.4mm - Color: Silver - Material: Alloy

- Sunlite replacement cartridge bearings - Sold in pairs

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- Variable widths - Left: 35mm - Center: 52mm - Right: 37.5mm - Length: 124.5mm - Overall: 145.5mm

Replace the top bearing in your YST8300 headset with these caged ball bearings.